The Best Custom Shutters, Blinds & Shades!
Proudly Serving Raleigh, Durham and Central North Carolina

How Window Shutters Allow You to Control Room Temperature

Closed shutters are the next best barrier against the extreme temperature and wind in Raleigh, coming right after windows. Other window treatments such as shades, blinds, and draperies block most of the external temperature, but not all. And, where a sturdy window treatment means the difference between a cozy seat next to the window and one that’s not, Polywood® shutters are the preferred choice.

We make Polywood shutters from a synthetic polymer that insulates up to 70% better than a comparable traditional wood shutter. As a matter of fact, the Polywood Shutter Insulating System blocks as much as 30 degrees of airflow and reduces heat transfer by 45.96%. This means energy savings for you – and full room temperature control.

Your home’s heating and cooling system takes less time to work now that you have reduced the impact from the outside weather. If you want to feel some of the light and be more exposed to the outside temperature, just move the louvers open and adjust them to how you’d like them. You can get even more window treatment temperature control. Simply follow the instructions below to close your shutters completely.


How to Close Your Shutters for Complete Temperature Control

Two parts of your shutters should be closed to seal off external temperature: the louvers and the panels.

To close your Polywood shutter panels properly, swing them toward the window. As you move the panels into the shutter frame, ensure that the pieces of weatherstripping interlock along the vertical ends of your shutters.

Temperature Control 

To close your louvers properly, push the tilt rod toward the louvers and ensure that the top of the tilt rod will fit into the “mouse hole” just above the top louver. The best way to do that is to run your hand up the tilt rod, and push in as you go up. This is also true for taller shutters – sometimes a small push at the bottom of the tilt rod isn't enough and doesn’t close gaps at the top.

Temperature Control